Eclipse GS L4-2350cc 2.4L SOHC MFI (2002)
STEP 4. Check the input signal (by using the Pulse Check).
Check the following switches and input signals:
-
Interior light loaded signal
If the switches (see table), which are applicable for the input signal check, are operated, check if scan tool MB991502 sounds or not.
Q: Does scan tool MB991502 sound when the interior light loaded signal is operated?
YES: Replace the ETACS-ECU. Check that the dome light illuminates normally.
NO: Refer to Inspection Procedure P-14 "ETACS-ECU does not receive a interior light loaded signal."
Inspection Procedure N-1
Theft-alarm System: Theft-alarm System is not Armed (Theft-alarm Indicator Light does not Illuminate)
NOTE: This troubleshooting requires use of scan tool MB991502 and SWS monitor kit MB991862. For details of how to use the SWS monitor, refer
to "How to use SWS monitor."