Eclipse GS L4-2350cc 2.4L SOHC MFI (2002)
STEP 6. Check the wiring harness between hood switch connector A-23 and ETACS-ECU connector C-117.
NOTE: Also check intermediate connector C-89. If intermediate connectors C-89 is damaged, repair or replace the connector as described in Harness
Connector Inspection.
Q: Is the wiring harness between hood switch connector A-23 and ETACS-ECU connector C-117 in good condition?
YES: Replace the ETACS-ECU. If the theft-alarm system operates normally, it indicates that a correct signal is sent from the hood switch.
NO: Repair the wiring harness. If the theft-alarm system operates normally, it indicates that a correct signal is sent from the hood switch.
Inspection Procedure P-9
The Liftgate Latch Switch <ECLIPSE> or the Trunk Lid Latch Switch <ECLIPSE SPYDER> Signal is not sent to the ETACS-ECU.