mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2324 > < Initial Inspection and Diagnostic Overview|Page 2322
Page 398
background image

NO: Repair it. When the theft-alarm system operates normally, check that the signal is input normally from the liftgate lock key cylinder switch
<ECLIPSE> or the trunk lid lock key cylinder switch <ECLIPSE SPYDER>.

STEP 5. Check the liftgate lock key cylinder switch <ECLIPSE> or the trunk lid lock key cylinder switch <ECLIPSE SPYDER> connector
F-10 and ETACS-ECU connector C-117 for damage.

Q: Are the liftgate lock key cylinder switch <ECLIPSE> or the trunk lid lock key cylinder switch <ECLIPSE SPYDER> connector F-10 and
ETACS-ECU connector C-117 in good condition?

YES: Go to Step 6.

NO: Repair or replace them. Refer to Harness Connector Inspection. When the theft-alarm system operates normally, check that the signal is input
normally from the liftgate lock key cylinder switch <ECLIPSE> or the trunk lid lock key cylinder switch <ECLIPSE SPYDER>.

Initial Inspection and Diagnostic Overview|Page 2324 > < Initial Inspection and Diagnostic Overview|Page 2322