Eclipse GS L4-2350cc 2.4L SOHC MFI (2002)
CAUTION: If the rack stopper is first turned counterclockwise, the circlip will get caught in the slot in the housing and the rack stopper will not
turn.
1. Turn the rack stopper clockwise until the end of the circlip comes out of the slot in the rack housing.
2. Turn the rack stopper counterclockwise to remove the circlip.
>>G<< RACK REMOVAL
Pull out the rack slowly. At this time also take out the rack stopper and the rack bushing simultaneously.
>>H<< 0IL SEAL REMOVAL
CAUTION: Do not damage oil seal press fitting surface.
Partially bend oil seal and remove from rack bushing.
>>I<< BALL BEARING REMOVAL
Use a brass bar or special tool MB990939 to remove the ball bearing from the gear housing.
>>J<< NEEDLE ROLLER BEARING REMOVAL
