Eclipse GS L4-2350cc 2.4L SOHC MFI (2002)
1. Apply a coating of the DIAMOND ATF to the outside of the oil seal and O-ring.
2. Use special tool MB990927 to press fit oil seal until it touches rack bush end.
>>D<< RACK INSTALLATION
CAUTION: Do not close the vent hole in the rack with grease.
1. Apply a coating of multipurpose grease to the rack teeth face.
2. Cover rack serrations with special tool MB991213.
3. Apply DIAMOND ATF to special tool MB991213.
4. Align center of oil seal with rack to prevent retainer spring from slipping. Slowly insert rack from power cylinder side.
>>E<< RACK BUSHING INSTALLATION
CAUTION: Do not allow oil seal refiner spring to slip out.
Wrap the rack end with vinyl tape, apply a coating of the DIAMOND ATF, and then install the rack bushing and rack stopper.
>>F<< CIRCLIP INSTALLATION
