Eclipse GT V6-3.0L SOHC (2000)
CLEARANCE BETWEEN BRAKE PEDAL AND FLOORBOARD
1. Turn up the carpet etc. under the brake pedal.
2. Start the engine, depress the brake pedal with approximately 490 N (110 lbs.) of force, and measure the clearance between the brake pedal and the
floorboard.
Standard value: 90 mm (3.5 inches) or more [From the surface of melting sheet (floorboard) to the face of pedal pad]
3. If the clearance is outside the standard value, check for air trapped in the brake line, clearance between the lining, and the drum and dragging in
the parking brake.
Adjust and replace defective parts as required.
4. Return the carpet, etc. to its original position.
