Eclipse GT V6-3.0L SOHC (2000)
STEP 9. Check the harness wires between theft-alarm horn relay connector A-11X and fusible link (2).
NOTE: After checking junction block connector C-107 and C-110 and intermediate connector C-89, check the wires. If junction block connector C-107
and C-110 and intermediate connector C-89 are damaged, repair or replace them. Refer to Harness Connector Inspection.
If the harness wires between theft-alarm horn relay connector A-11X and fusible link (2) are damaged, repair them.
The answerback function should work normally.
STEP 10. Check the theft-alarm horn relay connector A-11X and ETACS-ECU connector C-112 for damage.
