Eclipse GT V6-3.0L SOHC (2000)
STEP 7. Check the washer motor connector A-33 and front-ECU connector A-09X for damage.
If the washer motor connector A-33 and front-ECU connector A-09X are damaged, repair or replace them. Refer to Harness Connector Inspection.
The windshield washer should work normally.
If the connectors are in good condition, go to Step 8.
STEP 8. Check the harness wires between washer motor connector A-33 and front-ECU connector A-09X.
NOTE: After checking intermediate connector C-06, check the wires. If intermediate connector C-06 is damaged, repair or replace it. Refer to Harness
Connector Inspection.
If the harness wires between washer motor connector A-33 and front-ECU connector A-09X are damaged, repair them. The windshield washer should
work normally.
Inspection Procedure H-1