Eclipse GT V6-3.0L SOHC (2000)
Connectors
CIRCUIT OPERATION
The ETACS-ECU operates the rear wiper according to the input signal from the backup light switch.
TECHNICAL DESCRIPTION (COMMENT)
The backup light switch input signal is used to operate the rear wiper. If the signal is an error, the rear wiper will not operate consecutively twice when
the rear wiper is on and the shift lever is moved to "R" position.
TROUBLESHOOTING HINTS
-
Malfunction of the backup light switch
-
Malfunction of the ETACS-ECU
-
Damaged harness wires or connectors
DIAGNOSIS
Required Special Tools:
MB991223: Test Harness Set
MB991502: Scan Tool (MUT-II)
MB991529: Diagnostic Trouble Code Check Harness
STEP 1. Check the backup light switch.
If the backup light switch is damaged, repair it.