Eclipse GT V6-3.0L SOHC (2000)
STEP 1. Check the door lock key cylinder switch.
Check the defective door lock key cylinder switch.
If the door lock key cylinder switch is damaged, replace it. The input signal from the driver's and passenger's door lock key cylinder switch should be
able to be checked and the functions, which are described in the "Technical Description (comment)," should work normally.
Driver's door lock key cylinder switch
If the driver's door lock key cylinder switch is not defective, go to Step 2.
Passenger's door lock key cylinder switch
If the passenger's door lock key cylinder switch is not defective, go to Step 7.
STEP 2. Check the driver's door lock key cylinder switch ground circuit at driver's door lock key cylinder switch connector E-14.
1. Disconnect driver's door lock key cylinder switch connector E-14 and measure at the harness side.
2. Resistance between terminal 2 and ground.
-
Should be less than 2 Ohms.
If open circuit, go to Step 3.
If less than 2 Ohms. go to Step 5.
