Eclipse GT V6-3.0L SOHC (2000)
STEP 11. Check the harness wires between passenger's door lock key cylinder switch connector E-06 and ETACS-ECU connector C-112.
NOTE: After checking intermediate connector C-19, check the wires. If intermediate connector C-19 is damaged, repair or replace it. Refer to Harness
Connector Inspection.
If the harness wires between passenger's door lock key cylinder switch connector E-06 and ETACS-ECU connector C-112 are damaged, repair them.
The input signal from the passenger's door lock key cylinder switch should be able to be checked and the functions, which are described in the
"Technical Description (comment)," should work normally.
If the harness wires are in good condition, replace the ETACS-ECU.
The input signal from the passenger's door lock key cylinder switch should be able to be checked and the functions, which are described in the
"Technical Description (comment)," should work normally.
Inspection Procedure O-12
Driver's Or Passenger's Door Lock Actuator Switch Input Circuit
