Eclipse GT V6-3.0L SOHC (2000)
The door lock switch input signal should be able to be checked and the central door locking system should work normally.
If the connector is in good condition, go to Step 4.
STEP 4. Check the harness wires between power window main switch connector E-12 and ground.
NOTE: After checking intermediate connector C-91, check the wires. If intermediate connector C-91 is damaged, repair or replace it. Refer to Harness
Connector Inspection.
If the harness wires between power window main switch connector E-12 and ground are damaged, repair them.
The door lock switch input signal should be able to be checked and the central door locking system should work normally.
STEP 5. Check the power window main switch connector E-12 and ETACS-ECU connector C-112 for damage.
If the power window main switch connector E-12 and ETACS-ECU connector C-112 are damaged, repair or replace them. Refer to Harness Connector
Inspection. The door lock switch input signal should be able to be checked and the central door locking system should work normally.
If the connectors are in good condition, go to Step 6.
