Eclipse GT V6-3.0L SOHC (2000)
STEP 10. Check the power window sub switch connector E-05 and ETACS-ECU connector C-112 for damage.
If the power window sub switch connector E-05 and ETACS-ECU connector C-112 are damaged, repair or replace them. Refer to Harness Connector
Inspection. The door lock switch input signal should be able to be checked and the central door locking system should work normally.
If the connectors are in good condition, go to Step 11.
STEP 11. Check the harness wires between power window sub switch connector E-05 and ETACS-ECU connector C-112.
NOTE: After checking intermediate connector C-19, check the wires. If intermediate connector C-19 is damaged, repair or replace it. Refer to Harness
Connector Inspection.
If the harness wires between power window sub switch connector E-05 and ETACS-ECU connector C-112 are damaged, repair them.
The door lock switch input signal should be able to be checked and the central door locking system should work normally.
If the harness wires are in good condition, replace the ETACS-ECU.
The door lock switch input signal should be able to be checked and the central door locking system should work normally.
Inspection Procedure O-14
