Eclipse GT V6-3.0L SOHC (2000)
Ignition Control Module: Testing and Inspection
IGNITION COIL AND IGNITION POWER TRANSISTOR
Required Special Tool:
MB991348: Test Harness Set
Measurement Method
1. Disconnect the connector, and connect test harness special tool, (MB991348), in between. (All terminals should be connected.)
2. Connect the oscilloscope probe to distributor connector terminal 3.
Alternate method Crest harness not available)
1. Connect the oscilloscope probe to ECM or PCM terminal 11.
Standard Wave Pattern Observation conditions
Standard Wave Pattern
Standard wave pattern
Wave Pattern Observation Points
