Eclipse GT V6-3.0L SOHC (2000)
RECALL CAMPAIGN CLAIM PARTS AND LABOR DETAIL INFO SCREEN:
^
USE C0111AXX TO REPLACE POWER STEERING OIL FEED TUBE ON FEDERAL 3.0L V6 2000 MODEL ECLIPSE AND GALANT (IN
BUILD RANGE)
Procedure
Power Steering Oil Feed Tube Replacement
The following procedure is a simple parts replacement process. No modifications are required. The following tools are required to complete this recall
campaign:
^
12 mm Flare Nut Wrench
^
12 mm Crow's Foot
^
Torque Wrench
1.
Raise the vehicle on a lift.
2.
Remove the left front wheel.
3.
Clean any oil and dirt from the steering rack near the tube fittings.
4.
Place a drain pan under the steering rack to catch the power steering fluid which will drain out when the old oil feed tube is removed.