Eclipse GT V6-3.0L SOHC (2000)
Air Bag(s) Arming and Disarming: Vehicle Damage Warnings
WARNING:
1. The SRS components should not be subjected to heat over 93° C (200° F), so remove the SRS-ECU, air bag modules (driver's side and
front passenger's side), front seat assemblies (side air bag module), clock spring, side impact sensors before drying or baking the vehicle
after painting. Recheck the SRS system operability after reinstalling them. (Refer to General Information, Maintenance Service - SRS
Maintenance.)
2. If the SRS components are removed for the purpose of checking, sheet metal repair, painting, etc., they should be stored in a clean, dry
place until they are reinstalled.
If the SRS components are to be removed or replaced as a result of maintenance, diagnosis, etc., follow the appropriate procedure. (SRS Air Bag Control
Unit: Refer to Air Bag Modules and Clock Spring, Side Impact Sensor.)