Eclipse RS L4-2350cc 2.4L SOHC MFI (2002)
6. Outer shim A
7. Clip
4. Remove the following parts from caliper support. <FRONT (3.0L ENGINE)>
1. Pad and wear indicator assembly
2. Pad assembly
3. Inner shim
4. Outer shim
5. Pad clip
5. Remove the following parts from caliper support. <REAR (3.0L ENGINE)>
1. Pad and wear indicator assembly
2. Inner shim B
3. Inner shim A
4. Pad assembly
5. Outer shim
6. Clip
6. Measure the hub torque before and after pad installation.
Follow the procedure:
CAUTION: Do not apply excessive grease. Excessive grease may cause brake performance to become poor.
7. For front disc brake <2.4L ENGINE> and rear disc bake <3.0L ENGINE>, apply brake grease SAE J310, NLGI number 1 to the following
positions before installing the pad.
<FRONT (2.4L ENGINE)>
^
Pad and wear indicator assembly and inner shim A contact surface
^
Inner shim A and inner shim B contact surface
^
Pad assembly and outer shim A contact surface
^
Outer shim A and inner shim B contact surface