Eclipse RS L4-2350cc 2.4L SOHC MFI (2002)
STEP 1. Check the ambient sensor connector A-29 for damage.
Q: Is the ambient sensor connector A-29 in good condition?
YES: Go to Step 2.
NO: Repair or replace it. Refer to Harness Connector Inspection.
STEP 2. Check the harness wires between ambient sensor connector A-29 and multi-center display connector C-09.
NOTE: After checking intermediate connector C-89, check the wires. If intermediate connector C-89 is damaged, repairer replace it. Refer to Harness
Connector Inspection.
Q: Is the harness wires between ambient sensor connector A-29 and multi-center display connector C-09 in good condition?
YES: Go to Step 3.
NO: Repair them. The multi-center display should work normally.
