mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 1973 > < Initial Inspection and Diagnostic Overview|Page 1971
Page 56
background image

STEP 2. Check the driver's door lock actuator.

Remove the driver's door lock actuator, and check it. Refer to Door Handle and Latch.

Q: Does the driver's door lock actuator work normally?

YES: Go to Step 3.

NO: Replace the driver's door lock actuator. Check that all the doors can be locked and unlocked normally.

STEP 3. Check ETACS-ECU connectors C-117, C-119 and driver's door lock actuator connector E-13 for damage. 

Q: Are ETACS-ECU connectors C-117, C-119 and driver's door lock actuator connector E-13 in good condition?

YES: Go to Step 4.

NO: Repair or check the connector. Refer to Harness Connector Inspection. Check that all the doors can be locked and unlocked normally.

Initial Inspection and Diagnostic Overview|Page 1973 > < Initial Inspection and Diagnostic Overview|Page 1971