mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 1976 > < Initial Inspection and Diagnostic Overview|Page 1974
Page 59
background image

STEP 7. Check the wiring harness from ETACS-ECU connector C-119 to front passenger's door lock actuator connector E-07.

NOTE:  Also check junction block connector C-108 and intermediate connector C-95. If junction block connector C-108 or intermediate connector C-95
is damaged, repair or replace the connector as described in Harness Connector Inspection.

Q: Is the wiring harness from ETACS-ECU connector C-119 to front passenger's door lock actuator connector E-07 in good condition?

YES: Replace the ETACS-ECU. Check that all the doors can be locked and unlocked normally.

NO: Repair the wiring harness. Check that all the doors can be locked and unlocked normally.

Inspection Procedure C-3

Central Door Locking System: All the Doors do not Lock or Unlock with just the Door Lock Switch Operation.

Initial Inspection and Diagnostic Overview|Page 1976 > < Initial Inspection and Diagnostic Overview|Page 1974