Eclipse RS L4-2350cc 2.4L SOHC MFI (2002)
3. Connect terminal No.73 to ground.
Q: Does the seat belt warning light illuminate?
YES: Replace the ETACS-ECU. Check that the seat belt warning light illuminates normally.
NO: Go to Step 5.
STEP 5. Check the seat belt warning light bulb.
Q: Is the seat belt warning light bulb in good condition?
YES: Go to Step 6.
NO: Replace the bulb. Check that the seat belt warning light illuminates normally.
STEP 6. Check the combination meter (printed-circuit board).
1. Remove the combination meter.
2. Remove the seat belt warning light bulb. Then measure the resistance value between the bulb terminals.