mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2125 > < Initial Inspection and Diagnostic Overview|Page 2123
Page 208
background image

STEP 15. Check headlight (LH) connector A-24 and front-ECU connector A-10X for damage.

Q: Are headlight (LH) connector A-24 and front-ECU connector A-10X in good condition?

YES: Go to Step 16.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the headlights illuminate normally.

STEP 16. Check the wiring harness between headlight (LH) connector A-24 and front-ECU connector A-10X.

Q: Is the wiring harness between headlight (LH) connector A-24 and front-ECU connector A-10X in good condition?

YES: No action to be taken.

NO: Repair the wiring harness. Check that the headlights illuminate normally.

STEP 17. Check headlight (RH) bulb.

1. Remove the headlight (RH) bulb.
2. Check that the headlight (RH) bulb is not broken.

Initial Inspection and Diagnostic Overview|Page 2125 > < Initial Inspection and Diagnostic Overview|Page 2123