mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2151 > < Initial Inspection and Diagnostic Overview|Page 2149
Page 234
background image

STEP 16. Check rear combination light (LH) connector F-17 for damage.

Q: Is rear combination light (LH) connector F-17 in good condition?

YES: Go to Step 17.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the turn-signal lights illuminate normally.

STEP 17. Check the wiring harness between rear combination light (LH) connector F-17 and ground.

Q: Is the wiring harness between rear combination light (LH) connector F-17 and ground in good condition?

YES: Replace the rear combination light socket assembly (LH). Check that the turn-signal lights illuminate normally.

NO: Repair the wiring harness. Check that the turn-signal lights illuminate normally.

Initial Inspection and Diagnostic Overview|Page 2151 > < Initial Inspection and Diagnostic Overview|Page 2149