mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2169 > < Initial Inspection and Diagnostic Overview|Page 2167
Page 252
background image

Connectors

TECHNICAL DESCRIPTION (COMMENT)

If one of the fog lights does not illuminate, the fog light relay or the fog light bulb may be defective. If the fog light indicator light does not illuminate,
the combination meter may be defective.

TROUBLESHOOTING HINTS

-

Malfunction of the fog light bulb

-

Malfunction of the combination meter

-

Damaged harness wires or connectors

DIAGNOSIS

Required Special Tools:

-

MB991223: Harness Set

STEP 1. Check that the fog lights and the fog light indicator light illuminate.

Q: Do the fog lights and the fog light indicator light illuminate normally?

Only the fog light (LH) does not illuminate : Go to Step 2. 
Only the fog light (RH) does not illuminate : Go to Step 8.
Only the fog light indicator light does not illuminate : Go to Step 14.
Both of the fog lights do not illuminate : Refer to Inspection procedure L-1 "Fog lights do not illuminate when the fog light switch is turned on".

STEP 2. Check the fog light bulb (LH).

1. Remove the fog light bulb (LH).
2. Check that the fog light bulb (LH) is not broken.

Q: Is the fog light bulb (LH) in good condition?

Initial Inspection and Diagnostic Overview|Page 2169 > < Initial Inspection and Diagnostic Overview|Page 2167