mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2173 > < Initial Inspection and Diagnostic Overview|Page 2171
Page 256
background image

STEP 11. Check the wiring harness between fog light (RH) connector A-31 and ground.

Q: Is the wiring harness between fog light (RH) connector A-31 and ground in good condition?

YES: No action to be taken.

NO: Repair the wiring harness. Check that the fog lights illuminate normally.

STEP 12. Check fog light relay connector A-04X and fog light (RH) connector A-31 for damage.

Q: Are fog light relay connector A-04X and fog light (RH) connector A-31 in good condition?

YES: Go to Step 13. 

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the fog lights illuminate normally.

Initial Inspection and Diagnostic Overview|Page 2173 > < Initial Inspection and Diagnostic Overview|Page 2171