mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2175 > < Initial Inspection and Diagnostic Overview|Page 2173
Page 258
background image

YES: Go to Step 18.

NO: Go to Step 16.

STEP 16. Check combination meter connector C-43 for damage.

Q: Is combination meter connector C-43 in good condition?

YES: Go to Step 17.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the fog light indicator light illuminates normally. 

STEP 17. Check the wiring harness between combination meter connector C-43 and ground.

NOTE:  Also check joint connector C-78. If joint connector C-78 is damaged, repair or replace the connector as described in Harness Connector
Inspection. 

Q: Is the wiring harness between combination meter connector C-43 and ground in good condition?

YES: No action to be taken.

NO: Repair the wiring harness. Check that the fog light indicator light illuminates normally.

Initial Inspection and Diagnostic Overview|Page 2175 > < Initial Inspection and Diagnostic Overview|Page 2173