mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2217 > < Initial Inspection and Diagnostic Overview|Page 2215
Page 300
background image

STEP 17. Check the wiring harness between horn relay connector A-05X and horn connector A-27.

Q: Is the wiring harness between horn relay connector A-05X and horn connector A-27 in good condition?

YES: Go to Step 18.

NO: Repair the wiring harness. All the vehicle horn (including the theft-alarm horn) should sound when the theft-alarm system is triggered.

 

STEP 18. Check rear horn relay connector A-05X and ETACS-ECU connector C-117 for damage.

Q: Are horn relay connector A-05X and ETACS-ECU connector C-117 in good condition?

YES: Go to Step 19.

 

NO: Repair or replace the connector. Refer to Harness Connector Inspection. All the vehicle horn (including the theft-alarm horn) should sound when
the theft-alarm system is triggered.

Initial Inspection and Diagnostic Overview|Page 2217 > < Initial Inspection and Diagnostic Overview|Page 2215