Eclipse RS L4-2350cc 2.4L SOHC MFI (2002)
STEP 13. Check the wiring harness between front passenger's door lock actuator switch connector E-07 and ETACS-ECU connector C-117.
NOTE: Also check intermediate connector C-95. If intermediate connectors C-95 is damaged, repair or replace the connector as described in Harness
Connector Inspection.
Q: Is the wiring harness between front passenger's door lock actuator switch connector E-07 and ETACS-ECU connector C-117 in good condition?
YES: Replace the ETACS-ECU. If the functions, which are described in "CIRCUIT OPERATION", work normally, the input signal from the front
passenger's door lock actuator switch should be normal.
NO: Repair the wiring harness. If the functions, which are described in "CIRCUIT OPERATION", work normally, the input signal from the front
passenger's door lock actuator switch should be normal.
Inspection Procedure P-6
The ETACS-ECU does not Receive Any Signal from the Door Lock Switch (Incorporated in Power Window Main Switch and Power Window
Sub Switch).
