Eclipse RS L4-2350cc 2.4L SOHC MFI (2002)
STEP 7. Check the wiring harness between power window main switch connector E-12 and ETACS-ECU connector C-117.
NOTE: Also check intermediate connector C-91. If intermediate connectors C-91 is damaged, repair or replace the connector as described in Harness
Connector Inspection.
Q: Is the wiring harness between power window main switch connector E-12 and ETACS-ECU connector C-117 in good condition?
YES: Replace the ETACS-ECU. If the central door locking system works normally, input signal from the door lock switch should be normal.
NO: Repair the wiring harness. If the central door locking system works normally, input signal from the door lock switch should be normal.
STEP 8. Check the door lock switch (power window sub switch).
Remove the power window sub switch. Refer to Door - Door Trim and Waterproof Film. Then check continuity between the switch terminals.
Q: Is the door lock switch (power window sub switch) in good condition?
YES: Go to Step 9.
NO: Replace the power window sub switch. If the central door locking system works normally, input signal from the door lock switch should be
normal.
