mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Control Arm|Front|Page 4145 > < Control Arm|Front|Page 4143
Page 2
background image

Install the upper arm bracket so that the dimension shown in the illustration is at the standard value.
Standard value (A): 37.2 ± 2 mm (1.46 ± 0.08 inches) 

INSPECTION 

^

Check the bushings for wear and deterioration.

^

Check the upper arm for bends or damage.

^

Check all bolts for condition and straightness.

Lower

Control Arm|Front|Page 4145 > < Control Arm|Front|Page 4143