Eclipse RS FWD L4-1997cc 2.0L DOHC MFI (1997)
MFI Relay: Testing and Inspection
1. Remove the relay.
2. Check that there is continuity between (4) and (6) terminals.
Standard value: 35 - 75 ohms
3. Use jumper leads to connect relay terminal No.6 to the battery (+) terminal and terminal No.4 to the battery (-) terminal.
Check the continuity between relay terminal No.2-8 while connecting and disconnecting the jumper lead at the battery (-) terminal.
4. If there is a defect, replace the MFI (ASD) relay or fuel pump relay.