mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Convertible Top - Separation From Frame|Page 4759 > < Sunroof - Inoperative/Remains Open|Page 4748
Page 1
background image

Convertible Top Canvas: All Technical Service Bulletins
Convertible Top - Separation From Frame

NO:
TSB-99-42A-002

DATE: 
January, 1999

MODEL:
Eclipse Spyder

SUBJECT:
TOP COVER PULLING BACK FROM # 1 BOW

PURPOSE

This bulletin contains information for repairing a condition where the top cover pulls away from the # 1 bow.

BACKGROUND INFORMATION

Some customers may complain about the top cover pulling away in the area of the # 1 bow. This gives the impression that the top cover is shrinking and
makes the corner of the #1 bow visible. The top assembly or cover does not need to be replaced. The cover can be repositioned to correct this condition.

AFFECTED VEHICLES
1996-99 Eclipse Spyder Convertible

PROCEDURE

1. Open the top to approximately 250mm (1 foot) from the fully opened position.

2. Referring to section 42 of the service manual, remove the top cover retainer.

Convertible Top - Separation From Frame|Page 4759 > < Sunroof - Inoperative/Remains Open|Page 4748