Eclipse Spyder FWD L4-2350cc 2.4L SOHC 16 Valve (1996)
12.
Inspect the stay pad to see that it is stapled securely to the # 2 bow. Re-staple the stay pad if any of the staples have come loose. Use 4 stainless
steel staples (DUO-FAST 5312-DSS or equivalent) per side making sure the stay pad and staples are in their original locations. The stay pad
should hang over the end of the # 2 bow by about 1/4 inch.
NOTE:
The elastic straps have no front-to-back orientation and are neither right or left-handed.
13.
Open and close the convertible top several times to be sure that the flipper arm moves the # 2 bow clear from the # 1 bow as the top opens.
Parts / Warranty Information
Order parts in the normal manner even though CAPS may show no quantities in PDC warehouses. Parts are in stock and will be drop-shipped from ASC
to your dealership. As the control link assemblies are not required on all vehicles, order only as needed,
Description
Part Number
Remarks
Elastic Strap
MR328559
2 required per vehicle
Control Link Assembly
MR328561 (left side)
order only as needed
Control Link Assembly
MR328562 (right side)
order only as needed
Submit a normal "W" claim.
Convertible Top Elastic Strap Installation
Nature Code: 99D
Cause Code:
990
Labor Operation Number: 42386810
Time Allowance: 0.2 hr. (Both Sides)
Warranty Coverage: 36 months/36,000 miles
Convertible Top Control Link Installation
Nature Code: 99D
Cause Code:
990
Labor Operation Number: 42386910
Time Allowance: 0.4 hr. (Each Side)
Warranty Coverage: 36 months/36,000 miles