Eclipse Spyder FWD L4-2350cc 2.4L SOHC 16 Valve (1996)
4.
Disconnect the slide motor from the harness.
5.
Using a 1/4" ratchet, extension, and T-20 Torx drive socket, remove and discard the 4 motor bracket screws. For the left side motor bracket
screws, use a universal adapter as shown. (Left side as viewed with seat installed in the vehicle)
6.
Remove the flex shaft from the left side reducer, and remove the slide motor assembly. If necessary, cut the motor connector harness wires in order
to remove the motor assembly from the seat frame.