mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Lateral Stabilizer Rod > < Control Arm|Front|Page 3831
Page 4
background image

Fig. 32  Steering Linkage Puller Installation

6. Loosen toe control arm joint and knuckle connection using steering linkage puller tool No. MB991113 or equivalent. Tie cord from tool to

vehicle, then loosen but do not remove nutFig. 32.

Fig. 33  Toe Control Arm Assembly Mounting Bolt Removal

7. Scribe installation reference marks on toe control arm assembly mounting bolt, Fig. 33, then remove bolt and toe control arm assembly.
8. Reverse procedure to install.

Lateral Stabilizer Rod > < Control Arm|Front|Page 3831