Eclipse Spyder FWD L4-2350cc 2.4L SOHC 16 Valve (1996)
3.
Remove the retaining plate and the underdrive clutch accumulator. Discard the accumulator.
4.
Install two new teflon seal rings to the new aluminum accumulator. Refer to the PARTS INFORMATION section of this bulletin.
5.
Install the retaining plate and the new accumulator into the valve body.
6.
Reinstall the valve body and reassemble the transaxle.
7.
Using the MUT-II scan tool, erase the DTCs. PARTS INFORMATION
Part Number
Description
Quantity Required
MO4446620
Underdrive Clutch Accumulator
1
M04446544
Teflon Seal Ring
2
WARRANTY INFORMATION
Use standard warranty labor operation codes and procedures.