Eclipse Spyder GS L4-2350cc 2.4L SOHC MFI (2001)
STEP 7. Check the harness wires between passenger's door switch connector D-01 and ETACS-ECU connectors C-111 and C-114.
NOTE: After checking intermediate connector C-92 and junction block connector C-104, check the wires. If intermediate connector C-92 and junction
block connector C-104 are damaged, repair or replace them. Refer to Harness Connector Inspection.
Q: Are the harness wires between passenger's door switch connector D-01 and ETACS-ECU connector C-111 and C-114 in good condition?
YES: Replace the ETACS-ECU. The passenger's door switch input signal should be able to be checked and the functions, which are described in the
"Technical Description (comment)," should work normally.
NO: Repair them. The passenger's door switch input signal should be able to be checked and the functions, which are described in the "Technical
Description (comment)," should work normally.
Inspection Procedure O-11
Driver's or Passenger's Door Lock Key Cylinder Switch Is Not Sent to the ETACS-ECU