Eclipse Spyder GS L4-2350cc 2.4L SOHC MFI (2001)
STEP 12. Check the passenger's door lock actuator switch connector E-07 and ETACS-ECU connector C-112 for damage.
Q:
YES: Go to Step 13.
NO: Repair or replace them. Refer to Harness Connector Inspection. The input signal from the passenger's door lock actuator switch should be able to
be checked and the functions, which are described in the "Technical Description (comment)," should work normally.
STEP 13. Check the harness wires between passengers door lock actuator switch connector E-07 and ETACS-ECU connector C-112.
NOTE: After checking intermediate connector C-95, check the wires. If intermediate connector C-95 is damaged, repair or replace it. Refer to Harness
Connector Inspection.
Q: Are the harness wires between passenger's door lock actuator switch connector E-07 and ETACS-ECU connector C-112 in good condition?
YES: Replace the ETACS-ECU. The input signal from the passenger's door lock actuator switch should be able to be checked and the functions,
which are described in the "Technical Description (comment)," should work normally.
NO: Repair them. The input signal from the passengers door lock actuator switch should be able to be checked and the functions, which are described
in the "Technical Description (comment)," should work normally.
Inspection Procedure O-13
Door Lock Switch (Incorporated In Power Window Main Switch and Power Window Sub Switch) Signal Is Not Sent to ETACS-ECU