Eclipse Spyder GS L4-2350cc 2.4L SOHC MFI (2001)
-
Light reminder tone alarm function
-
Central door locking system
-
Hazard warning light
-
Interior light dimming function Theft-alarm system
TROUBLESHOOTING HINTS
-
Malfunction of the ETACS-ECU
-
Damaged harness wires or connectors
DIAGNOSIS
Required Special Tools:
-
MB991223: Test Harness Set
STEP 1. Check the battery circuit at the ETACS-ECU connector C-114.
1. Disconnect the ETACS-ECU connector C-114 and measure at the junction block side
2. Measure the Voltage between terminal 2 and ground.
Q: Is the voltage approximately 12 volts (battery positive voltage)?
YES: Replace the ETACS-ECU. The functions, which are described in the "Technical Description (comment)," should work normally.
NO: Go to Step 2.
STEP 2. Check ETACS-ECU connector C-114 for damage.
Q: Is ETACS-ECU connector C-114 in good condition?
YES: Go to Step 3.
NO: Repair or replace it. Refer to Harness Connector Inspection. The functions, which are described in the "Technical Description (comment),"
should work normally.