Eclipse Spyder GT V6-3.0L SOHC (2002)
2. Measure the voltage between terminal 1 and ground by backprobing.
Q: Is the voltage approximately 12 volts (battery positive voltage)?
YES: Go to Step 7.
NO: Go to Step 5.
STEP 5. Check multi-center display connector C-09 for damage.
Q: Is multi-center display connector C-09 in good condition?
YES: Go to Step 6.
NO: Repair or replace it. Refer to Harness Connector Inspection. The multi-center display should work normally.
STEP 6. Check the harness wires between C-09 and battery.