Eclipse Spyder GT V6-3.0L SOHC (2002)
Brake Rotor/Disc: Testing and Inspection
DISC BRAKE ROTOR CHECK
CAUTION: Disc brakes must be kept within the allowable service values in order to maintain normal brake operation.
Before turning the brake disc, the following conditions should be checked.
FRONT BRAKE DISC RUN-OUT CHECK AND CORRECTION
1. Remove the caliper support; then raise the caliper assembly upward and secure it with a wire.
2. Inspect the disc surface for grooves, cracks and rust. Clean the disc thoroughly and remove all rust.
3. Place a dial gauge approximately 5 mm (0.2 inch) from the outer circumference of the brake disc, and measure the runout of the disc.
Limit: 0.06 mm (0.002 inch)