Eclipse Spyder GT V6-3.0L SOHC (2002)
Use special tool MB998781 to secure the flywheel or drive plate, and remove the bolts.
INSTALLATION SERVICE POINTS
>>A<< CRANKSHAFT REAR OIL SEAL INSTALLATION
1. Apply a small amount of engine oil to the entire circumference of the oil seal lip.
2. Use special tool MD998718 to tap in the oil seal as shown in the illustration.
>>B<< DRIVE PLATE <A/T>/FLYWHEEL <M/T>/ADAPTER PLATE/PLATE <M/T> INSTALLATION
Use special tool MD998781 to hold the flywheel or drive plate in the same manner as removal. Then install the bolts.