Eclipse Spyder GT V6-3.0L SOHC (2002)
STEP 5. Check the wiring harness between position light (RH) connector A-32 and front-ECU connector A-10X.
NOTE: Also check intermediate connectors C-06 and C-89. If intermediate connector C-06 or C-89 is damaged, repair or replace the connector as
described in Harness connector Inspection.
Q: Is the wiring harness between position light (RH) connector A-32 and front-ECU connector A-10X in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. The position light (RH), the tail light (RH), and the side marker light (RH) should illuminate normally.
STEP 6. Check rear combination light (LH) connector F-17 for damage.
Q: Are rear combination light (LH) connector F-17 in good condition?
YES: Go to Step 7.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. The tail light (LH), side marker light (LH) and the license plate lights
should illuminate normally.
