mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2219 > < Initial Inspection and Diagnostic Overview|Page 2217
Page 187
background image

STEP 28. Check rear combination light (LH) connector F-17 and front-ECU connector A-10X for damage.

Q: Are rear combination light (LH) connector F-17 and front-ECU connector A-10X in good condition?

YES: Go to Step 29.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the tail light (LH) illuminates normally.

STEP 29. Check the wiring harness between rear combination light (LH) connector F-17 and front-ECU connector A-10X.

Initial Inspection and Diagnostic Overview|Page 2219 > < Initial Inspection and Diagnostic Overview|Page 2217