Eclipse Spyder GT V6-3.0L SOHC (2002)
STEP 12. Check headlight (RH) connector A-35 and front-ECU connector A-10X for damage.
Q: Are headlight (RH) connector A-35 and front-ECU connector A-10X in good condition?
YES: Go to Step 13.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the headlights illuminate normally.
STEP 13. Check the wiring harness between headlight (RH) connector A-35 and front-ECU connector A-10X.
NOTE: Also check intermediate connector C-06. If intermediate connector C-06 is damaged, repair or replace the connector as described in Harness
Connector Inspection.
Q: Is the wiring harness between headlight (RH) connector A-35 and front-ECU connector A-10X in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. Check that the headlights illuminate normally.
STEP 14. Check headlight (LH) bulb.
1. Remove the headlight (LH) bulb.
2. Check that the headlight (LH) bulb is not broken.
Q: Is headlight (LH) bulb normal?
YES: Go to Step 15.
NO: Replace the headlight bulb (LH). Check that the headlights illuminate normally.
