mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2273 > < Initial Inspection and Diagnostic Overview|Page 2271
Page 241
background image

STEP 28. Check combination meter connector C-43 and ETACS-ECU connector C-119 for damage.

Q: Are combination meter connector C-43 and ETACS-ECU connector C-119 in good condition?

YES: Go to Step 29.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the turn-signal lights illuminate normally.

Initial Inspection and Diagnostic Overview|Page 2273 > < Initial Inspection and Diagnostic Overview|Page 2271