mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2291 > < Initial Inspection and Diagnostic Overview|Page 2289
Page 259
background image

STEP 18. Check fog light relay connector A-04X and combination meter connector C-43 for damage.

Q: Are fog light relay connector A-04X and combination meter connector C-43 in good condition?

YES: Go to Step 19.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the fog light indicator light illuminates normally.

STEP 19. Check the wiring harness between fog light relay connector A-04X and combination meter connector C-43.

NOTE:  Also check intermediate connector C-89. If intermediate connectors C-89 is damaged, repair or replace the connector as described in Harness
Connector Inspection.

Q: Is the wiring harness between fog light relay connector A-04X and combination meter connector C-43 in good condition?

YES: Replace the combination meter. Check that the fog light indicator light illuminates normally.

Initial Inspection and Diagnostic Overview|Page 2291 > < Initial Inspection and Diagnostic Overview|Page 2289