mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2307 > < Initial Inspection and Diagnostic Overview|Page 2305
Page 275
background image

STEP 18. Check the wiring harness between trunk light connector F-21 and ETACS-ECU connector C-119.

NOTE:  Also check junction block connector C-101. If junction block connector C-101 is damaged, repair or replace the connector as described in
Harness Connector Inspection.

Q: is the wiring harness between trunk light connector F-21 and ETACS-ECU connector C-119 in good condition?

YES: No action to be taken.

NO: Repair the wiring harness. Check that the trunk lights illuminate normally.

Initial Inspection and Diagnostic Overview|Page 2307 > < Initial Inspection and Diagnostic Overview|Page 2305