mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2320 > < Initial Inspection and Diagnostic Overview|Page 2318
Page 288
background image

STEP 7. Check combination meter connector C-42 and ETACS-ECU connector C-118 for damage.

Q: Are combination meter connector C-42 and ETACS-ECU connector C-118 in good condition?

YES: Go to Step 8.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. The theft-alarm indicator light should illuminate, and the theft-alarm
system should be set normally.

STEP 8. Check the wiring harness between combination meter connector C-42 and ETACS-ECU connector C-118.

Q: Is the wiring harness between combination meter connector C-42 and ETACS-ECU connector C-118 in good condition?

YES: No action to be taken.

NO: Repair the wiring harness. The theft-alarm indicator light should illuminate, and the theft-alarm system should be set normally.

Initial Inspection and Diagnostic Overview|Page 2320 > < Initial Inspection and Diagnostic Overview|Page 2318