Eclipse Spyder GT V6-3.0L SOHC (2002)
YES:
-
Vehicles with theft-alarm system: Go to Step 2.
-
Vehicles without theft-alarm system: Go to Step 5.
NO: Replace the liftgate latch switch <ECLIPSE> or trunk lid latch switch <ECLIPSE SPYDER>. The input signal from the liftgate latch switch
<ECLIPSE> or the trunk lid latch switch <ECLIPSE SPYDER> should be able to be checked and the functions, which are described in the "Technical
Description (comment),"should work normally.
STEP 2. Check the trunk lid latch switch ground circuit at liftgate latch switch connector F-16 <ECLIPSE-Vehicle with theft-alarm system> or
the trunk lid latch switch connector F-16 <ECLIPSE SPYDER-Vehicle with theft-alarm system>.
1. Disconnect liftgate latch switch connector F-16 <ECLIPSE-Vehicle with theft-alarm system> or trunk lid latch switch connector F-16 <ECLIPSE
SPYDER-Vehicle with theft-alarm system> and measure at the harness side.
2. Measure the resistance between terminal 2 and ground.
-
The measured value should be 2 ohm or less.
Q: Does the measured resistance value correspond with this range?
YES: Go to Step 5.
NO: Go to Step 3.
STEP 3. Check liftgate latch switch connector F-16 <ECLIPSE-Vehicle with theft-alarm system> or trunk lid latch switch connector F-16
<ECLIPSE SPYDER-Vehicle with theft-alarm system> for damage.
Q: Is liftgate latch switch connector F-16 <ECLIPSE-Vehicle with theft-alarm system> or trunk lid latch switch connector F-16 <ECLIPSE
SPYDER-Vehicle with theft-alarm system> in good condition?
YES: Go to Step 4.
